前面全部都是: License request failed for feature PROE_DDiTy:開始,然後數字代碼不同 


-1 "cannot find license file" 
“無法找到許可證文件” 
中英文解答(由"lhwm"翻譯): 
The unlock software was unable to locate a license file. 
鎖定軟件無法找到許可證文件。 
Check the settings of these two environment variables: 
檢查設置這兩個環境變量: 
DIVISIONROOT should specify the release directory or be unset. divisionroot 
應指定釋放目錄或給予取消。 
DIVISION_LICENSE_FILE should specify the license file or be unset. division_license_file 
應指定許可文件或給予取消。 
If neither variables are set the license file is assumed to be /home/division/etc/license/license.dat. 
如果沒有變數設定許可文件,假設為/home/division/etc/license/license.dat 。 
Check that the license file is valid. 
檢查許可證文件是有效的。 


-2 "invalid license file syntax" 
“無效的許可證文件語法” 
中英文解答(由"lhwm"翻譯): 
The license file is corrupt. 
許可文件已損壞。 
Check the file and correct any errors. 
檢查文件和正確的任何錯誤。 


-3 "cannot connect to a license server" 
“無法連接到許可證服務器” 
中英文解答(由"lhwm"翻譯): 
The daemon name on the appropriate feature line is not the same as the daemon name on the daemon line. 
該進程的名稱的特徵線是不一樣的,作為進程名稱提出的守護特徵線。 
Check the license.dat file and correct this error. 
檢查license.dat文件和糾正這一錯誤。 


-4 "licensed number of users already reached" 
“超過授權的用戶數量” 
中英文解答(由"lhwm"翻譯): 
All the licenses are in use. 
所有的許可證都在使用。 
You will have to wait for a license to become available. 
你需要等待至少一個許可證釋放後才能用(即關閉其中一個用戶)。 


-5 "no such feature exists" 
“沒有這樣的功能,存在” 
中英文解答(由"lhwm"翻譯): 
The feature being requested does not exist in the license file being used. 
該功能被要求不存在的許可證文件正在使用中。 
Check that the correct license file is being used, and if it is, correct any errors. 
如果安裝正確的許可證,請檢查正確的許可文件是否被佔用。 
It may be that your current license does not permit the use of the given feature. 
可能許可證不允許使用特定的功能。 


-6 "no TCP "license" service exists" 
“無TCP'許可證'的服務存在” 
中英文解答(由"lhwm"翻譯): 
This happens if both of the following are true: 
這種情況如果在下列兩種情況: 
There is no port number specified on a SERVER line in the license file. 
有沒有接口所指明的數目在服務器上線的許可證文件。 
The tcp license service does not exist in the /etc/services file. 
在/etc/services目錄找不到TCP連接許可證服務。 


-7 "no socket connection to license manager server" 
“無法連接到許可證管理服務器” 
中英文解答(由"lhwm"翻譯): 
The process has lost its socket connection to the server. 
使用過程中中斷連接到服務器。 


-8 "encryption code in license file is inconsistent" 
“加密代碼,在許可文件是不一致的” 
中英文解答(由"lhwm"翻譯): 
The 20 character code in the license file does not correspond to the other data in the file. 
20字符(原翻譯為"性格")代碼在許可證文件不相符,其他數據在文件裡。 
Make sure the correct license file is being used. 
確保正確的許可文件正被使用。 
You should not make changes to the license file, otherwise the license file may become invalid. 
你不能更改許可文件,否則許可文件有可能無法正常使用。 


-9 "invalid host" 
“無效的主機” 
中英文解答(由"lhwm"翻譯): 
The hostid specified in the license file does not match the node on which the software is running. 
該服務器指定的許可證文件不匹配,該軟件正在運行。 


-10 "feature has expired" 
“功能已經過期” 
中英文解答(由"lhwm"翻譯): 
The license for the given feature has expired. 
授權給功能已過期。 
Check the expiry date in the license file. 
檢查屆滿日期在許可證文件。 
If it has expired contact Division Technical Support to renew your license. 
如果它已過期,請跟我們聯絡技術支持,以更新您的授權。 


-11 "invalid date format in license file" 
“許可證日期格式錯誤” 
中英文解答(由"lhwm"翻譯): 
The start of expiry date in a license file is invalid. 
開始,終止日期在許可證文件是無效的。 


-12 "invalid data returned from license server" 
“無效返回的數據,從許可證服務器” 
中英文解答(由"lhwm"翻譯): 
The connection between lmgrd and divlm or other vendor daemons did not take place correctly. 
lmgrd和divlm之間的聯繫,或其他供應商的後台程序沒有採取正確的執行。 


-13 "no SERVER lines in license file" 
“沒有服務器生產線的許可文件” 
中英文解答(由"lhwm"翻譯): 
There is no SERVER line in the license file. 
有沒有服務器產品線在許可證文件。 
All non-zero license count features require a license server. 
所有不為零的許可計數功能,可能需要一個許可證服務器。 


-14 "cannot find SERVER hostname in network database" 
“無法找到服務器的主機在網絡數據庫” 
中英文解答(由"lhwm"翻譯): 
The gethostbyname() system call failed, for the SERVER nodename entry. 
該gethostbyname()系統調用失敗,為服務器nodename條目。 


-15 "cannot connect to license server" 
“無法連接到許可證服務器” 
中英文解答(由"lhwm"翻譯): 
The connect() system call failed while attempting to connect to the daemon on all of the servers in use. 
連接系統調用失敗,企圖連接到後台程序,確保所有服務器在運行中。 
The License Manager may not be running. 
許可證管理器可能無法運行。 


-16 "cannot read data from license server" 
“無法讀取數據,從許可證服務器” 
中英文解答(由"lhwm"翻譯): 
Reading data from the license server failed either because the server timed out or because it has been reset. 
讀數據從許可證服務器失敗,可能是因為服務器超時或因為它已重置。 


-17 "cannot write data to license server" 
“不能將數據寫入許可證服務器” 
中英文解答(由"lhwm"翻譯): 
The process could not write data to the license server for some reason. 
過程中無法寫入數據的許可證服務器出於某種原因。 


-18 "license server does not support this feature" 
“許可證服務器不支持此功能” 
中英文解答(由"lhwm"翻譯): 
Usually this is caused when the version number for the given feature is lower than the version requested by the software. 
通常這個錯誤是因為程序版本過低造成的。 
It can also be caused if the feature has expired or has not started. 
或者授權的功能已經過期。 


-19 "error in select system call" 
“在選擇系統調用錯誤” 
中英文解答(由"lhwm"翻譯): 
This error should never occur from the client program. 
客戶端程序應該不會出現這個錯誤。 


-20 "license server busy (no majority)" 
“許可證服務器繁忙(沒有過半數) ” 
中英文解答(由"lhwm"翻譯): 
The license server is busy establishing a quorum of server nodes so that licensing can start. 
許可證服務器是建立一個繁忙的會議法定人數為服務器節點,以便發牌就可以開始。 
This error is very rare. 
這個錯誤是非常罕見的。 
You should retry. 
您應該重試。 


-21 "license file does not support this version" 
“許可文件不支持這個版本” 
中英文解答(由"lhwm"翻譯): 
The version requested is greater than the highest version supported by the license file for that feature. 
版本要求大於最高版本的支持,授權檔案為特徵。 


-22 "feature checkin failure detected at license....." 
“功能的抵達失敗的檢測許可… … ” 
中英文解答(由"lhwm"翻譯): 
The check-in request did not receive a proper reply from the vendor daemon. 
檢查在要求沒有得到適當的答復從供應商守護程序。 
The license may still be considered in use and is therefore lost. 
許可仍可能考慮在使用,並因此失去了。 


-23 "license server temporarily busy (new server connecting)" 
“許可證服務器暫時忙碌中(新的服務器連接) ” 
中英文解答(由"lhwm"翻譯): 
The vendor daemon is in the process of establishing a quorum condition. 
供應商進程是在這過程中建立授權人數情況。 
New requests from clients are deferred during this period. 
來自新的客戶端的請求超時。 
You should retry. 
您應該重試。 


-24 "users are queued for this feature" 
“用戶排隊等待這個功能” 
中英文解答(由"lhwm"翻譯): 
There are no more licenses for this feature and other users are waiting for it. 
有沒有更多的許可證此功能和其他用戶正在等待它。 


-25 "license server does not support this version of this feature" 
“許可證服務器不支持這個版本的此功能” 
中英文解答(由"lhwm"翻譯): 
The version specified in the check-out request is greater than the highest version number the daemon supports. 
版本指定,在檢查出的要求是大於最高版本號守護進程的支持。 


-26 "request for more licenses than this feature supports" 
“要求更多的授權,比此功能支持” 
中英文解答(由"lhwm"翻譯): 
A check-out request was made for more licenses than are supported in the license file. 
檢查出的要求,作出更多的授權,比支持在許可證文件。 
This request will never succeed. 
這一要求是絕對不能得逞的。

http://www.wangqian.net.cn/article/172.htm

 


Ansys license error - no free license
Problem: Ansys does not start, it fails with the following message:
Product: ANSYS/Research
 Checkout failed for the above product.
 Maximum number of users already reached
Solution:
We only have a limited number of Ansys Research licenses at CERN that is reserved for use when this license is really needed. The error message you get indicates that this license is already in use. Unless you need to do an Ansys simulation with many nodes, please ALWAYS use the Academic versions instead. The default version is: Academic Teaching Advanced. Alternatively, you can use Academic Research or Academic Associate licenses that have higher node limits.
You can select the Academic Teaching Advanced version from the Ansys launcher window. On Windows, please first go to: "Configure Ansys products" to set Academic Teaching Advanced as default before you proceed to launch Ansys. (From the Ansys Workbench environment, the licence settings are located under Options -> Tools -> Licences on the startup window.)

https://twiki.cern.ch/twiki/bin/view/CAE/AnsysFAQ

 

Goto <ptc_loadpoint>\bin and edit the proe1.psf file.

look for the line: ENV=PTC_D_LICENSE_FILE+=7788@[license_host]

add ;7788@[license_host2]

http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=30735

arrow
arrow
    全站熱搜

    sleepingwolf 發表在 痞客邦 留言(0) 人氣()